High quality and security
Comfortable operation
Tested and certified products
Promptness and reliability
The slide gate openers EST-FU are installed in a comfortable aluminium housing with plenty of space for additional fittings. The components are easily accessible via a lockable swivelling lever lock. The slide gate opener offers sufficient power in any situation and is designed for gates with an opening width of up to 30,000mm.
Simple, infinitely variable height adjustment of the toothed wheel thanks to gas pressure springs and height indicator. The adjustment range of 100mm can be extended by 90mm with an optional console.
Slightly loosen the four hexagonal screws (1) on the bracket so that the gear unit incl. toothed wheel can be pushed upwards by the gas pressure springs. The toothed wheel and toothed rack should engage with each other.
The pointer plate on the gear unit (2) pushes
the upper limit indicator (3) upwards. The lower limit indicator (4) is pushed manually under the pointer plate.
To determine the minimum and maximum height, the gate leaf is pushed manually over the entire opening width. In the process, the lower limit indicator moves to the optimal setting position.
The distance between the two limit indicators (5) can be easily measured.
Note: If the recommended maximum distance between the two limit indicators is exceeded, the wear of the toothed wheel and toothed rack will increase. For more information, see our installation instructions.
The lower limit indicator is fixed in its position with a screw. The gear unit is pressed onto the lower limit indicator and the four hexagonal screws are tightened again.
The position of the gate can be determined exactly via an absolute encoder - even after a power failure or emergency release (without re-teaching)
Higher rated power for a short time when the gate starts up
Type | Mains voltage | Dimensions incl. toothed wheel W/H/D | Gate leaf weight max. | Opening width max. | Velocity max. approx. |
---|---|---|---|---|---|
EST-FU 1500 | 230Vac | 530mm x 1,185mm x 335mm | 1,500kg | 30,000mm | 22.2m/min. |
EST-FU 1500A | 230Vac | 400mm x 1,143mm x 311mm | 1,500kg | 30,000mm | 22.2m/min. |
EST-FU 3000 | 230Vac | 530mm x 1,185mm x 335mm | 3,000kg | 30,000mm | 16.2m/min. |
EST-FU 3000A | 230Vac | 400mm x 1,143mm x 311mm | 3,000kg | 30,000mm | 16.2m/min. |
We reserve the right to make technical alterations without prior notice.